How To Set Up Wireless Internet Connection On Pc

A Wi-Fi adapter makes it convenient to connect your Windows 10 laptop or desktop to the network and cyberspace without dealing with cables. However, it's only user-friendly as long as you lot know where to discover the settings to connect.

Whether you're setting up a device for the first time, connecting in a new place, or if you're looking for an efficient method to connect multiple devices to the same network, Windows 10 offers various ways to connect to the internet using a Wi-Fi connexion quickly.

In this Windows 10 guide, we walk you through the steps to connect to a Wi-Fi network using the network flyout in Taskbar, Settings, Control Panel and using control lines with Command Prompt.

How to connect to Wi-Fi network using Taskbar
How to connect to Wi-Fi network using Settings
How to connect to Wi-Fi network using Control Panel
How to connect to Wi-Fi network using Command Prompt

How to connect to Wi-Fi network using Taskbar

To connect to a Wi-Fi network through the taskbar, use these steps:

Click the Network icon in the lesser-right corner of the taskbar.

Quick note: Alternatively, you tin can open Activity Middle (Windows cardinal + A), and then click the Network button in the Quick deportment section to access the network flyout. If you don't run into the button, click the upward pointer button on the left.
Select the wireless network to connect.
(Optional) Check the Connect automatically option.
Click the Connect push button.

Source: Windows Central

Quick tip: If you practice not see any wireless access point in the list, click the Wi-Fi button to plow on the adapter.
Confirm the network security key (password).

Source: Windows Central
Click the Next button.
Confirm whether the device should be discoverable in the network past other PCs.

One time you lot consummate the steps, the laptop will connect to the network using the Wi-Fi connection.

Reconnect automatically

In improver, Windows 10 also offers an option to reconnect the device automatically subsequently disconnecting the adapter manually.

To set the Wi-Fi adapter to reconnect automatically on Windows x, employ these steps:

Click the network icon in the organization tray.
Click the Wi-Fi button to turn off wireless connectivity.

Source: Windows Central
Utilise the drop-downwards menu and select when to re-connect automatically:
- Manually.
- In ane hour.
- In four hours.
- In one mean solar day.
Source: Windows Central

Subsequently y'all complete the steps, Windows x won't try to connect to a wireless connectedness until the time you selected. When using this functionality, the device will but connect automatically to the networks you accept connected to in the past.

How to connect to Wi-Fi network using Settings

Using "Network & Security" settings, you can likewise add wireless connections manually, and and so when the network is in range, the device volition connect automatically.

To prevision a Wi-Fi connection on Windows 10, use these steps:

Open Settings.
Click on Network & Security.
Click on Wi-Fi.
Click the Manage known networks selection.

Source: Windows Central
Click the Add a new network button.

Source: Windows Cardinal
Confirm the name of the network.
Use the drib-down menu to select the Security type – For example, WPA2-Personal AES.
Ostend the network security key (password).

Source: Windows Fundamental
Check the Connect automatically pick.
Check the Connect even if this network is not broadcasting choice (if required).
Click the Save push.

Once you complete the steps, the device volition connect automatically when the wireless network is in range.

How to connect to Wi-Fi network using Control Panel

To connect to a Wi-Fi network with Control Panel, use these steps:

Open Control Panel.
Click on Network and Internet.
Click on Network and Sharing Center.
Under the "Change your networking settings" section, click the Prepare a new connectedness or network selection.

Source: Windows Primal
Select the Manually connect to a wireless network option.

Source: Windows Primal
Click the Next button.
Ostend the network name.
Apply the drop-downwardly menu to select the Security type — for case, WPA2-Personal.
Confirm the network security central (countersign).
Check the Starting time this connection automatically option.
(Optional) Check the Connect even if the network is not broadcasting option.

Source: Windows Cardinal
Click the Next button.
Click the Shut push.

Once you complete the steps, the laptop, tablet, or desktop will automatically connect to the Wi-Fi network.

How to connect to Wi-Fi network using Command Prompt

Alternatively, y'all can also use the netsh command-line tool in Control Prompt to connect to a Wi-Fi network.

To connect to a Wi-Fi admission indicate with commands, utilise these steps:

Open Showtime.
Search for Command Prompt, right-click the superlative upshot, and select the Run as administrator option.
Type the following command to view the available network profiles and press Enter:

netsh wlan show profile
Confirm the Wi-Fi network profile with your preferred settings.
Type the following command to connect to the wireless network on Windows ten and printing Enter:

netsh wlan connect ssid=YOUR-WIFI-SSID proper noun=PROFILE-NAME

In the command, remember to specify the name (SSID) of the network and profile name with your network settings.

For example, this control connects to the "tsunami" network using the "tsunami" profile:

netsh wlan connect ssid=tsunami name=tsunami

Source: Windows Central

Quick Tip: On devices with more than ane wireless adapter, yous must too specify in the command which adapter you want to utilise. For example,: netsh wlan connect ssid=YOUR-WIFI-SSID name=Contour-NAME interface=Wi-Fi.

Afterwards you complete the steps, the device will connect to the wireless network.

New network connection

The netsh tool besides lets you manage Wi-Fi adapters and networks. The only caveat is that you tin only manage previously known networks since you cannot create new network profiles with this tool

When yous demand to use Control Prompt to connect one or multiple computers to the aforementioned wireless network, you tin export the network contour created automatically during the kickoff connection. Then you lot can import information technology using the netsh tool to connect using the command-line tool.

Consign Wi-Fi profile

To export a Wi-Fi profile with commands, use these steps:

Open up Showtime.
Search for Command Prompt, right-click the top result, and select the Run as administrator option.
Type the post-obit command to view the available network profiles and printing Enter:

netsh wlan show profile
Blazon the following command to export a profile and printing Enter:

netsh wlan export profile PROFILE-Proper noun cardinal=articulate folder=PATH\TO\EXPORT\FOLDER

For example, this command exports the tsunami profile to the "Documents" folder.

netsh wlan consign profile tsunami key=clear folder=C:\Users\yard\Documents

Source: Windows Fundamental

In one case you consummate the steps, you can import the aforementioned XML file to connect other devices to the same network.

Import Wi-Fi profile

To import a Wi-Fi profile on Windows x, use these steps:

Open Start.
Search for Control Prompt, right-click the peak result, and select the Run as ambassador choice.
Blazon the post-obit command to decide the proper noun of the network adapter and press Enter:

netsh wlan prove interfaces
Confirm the name of the adapter that volition connect to the network.
Type the following control to import the network profile and printing Enter:

netsh wlan add profile filename="PATH\TO\PROFILE.XML" Interface="YOUR-WIFI-ADAPTER-Proper noun" user=current

In the control, make sure to specify the location of the XML file and network interface name.

For example, this command imports the xml profile located in the "Documents" folder to the Wi-Fi adapter:

netsh wlan add profile filename="C:\Users\m\Documents\wi-fi-tsunami.xml" Interface="WI-FI" user=current

Source: Windows Central
Type the following command to connect to the wireless network and press Enter:

netsh wlan connect ssid=YOUR-WIFI-SSID name=PROFILE-NAME

In the command, specify the SSID and profile name that corresponds to your network.

For instance, this command connects to an admission signal using the "tsunami" SSID and "tsunami" contour name:

netsh wlan connect ssid=tsunami name=tsunami

Quick tip: If yous have multiple wireless interfaces, yous must also specify in the command which adapter you desire to utilize. For example, netsh wlan connect ssid=YOUR-WIFI-SSID proper name=Contour-NAME interface=Wi-Fi.

After you complete the steps, the computer should connect to the wireless network automatically.

More Windows resources

For more than helpful articles, coverage, and answers to common questions about Windows 10 and Windows 11, visit the post-obit resources:

Windows ten on Windows Central — All you need to know
Windows ten help, tips, and tricks
Windows 11 on Windows Central — All you need to know

Expanded and improved

The Saints Row reboot features ludicrously in-depth customization

The return of the Saints Row franchise from Deep Silver comes with a slightly more than grounded approach. Fortunately, the studio has revealed this doesn't apply to the game's customization options, which are more than ridiculous and in-depth than e'er before.

The colors

Review: Govee DreamView T1 Pro lighting for your TV is well worth $150

If you lot're looking to spruce up your home theater setup or you want to make your TV await better, the Govee DreamView T1 Pro TV ($150) is the way to go. Information technology is easy to fix, elementary to use, and information technology works with any Television receiver/AV configuration. Plus, it helps with eye fatigue — read our full review of this outstanding bias-lighting kit.